In a bold Fender first, the Tone Master Twin Reverb Blonde amplifier uses massive digital processing power to achieve a single remarkable sonic feat: faithfully modelling the circuitry and 85-watt power output of an original Twin tube amp. A high-performance 200-watt digital power amp is used to achieve the headroom and dynamic range of a real vintage Twin tube amp. The resonant pine cabinet is paired with two Celestion NEO Creamback speakers for a more distinctive rock 'n' roll flavour. The result is tubeless Twin Reverb tone, volume and dynamics virtually indistinguishable from the all-tube original. The reverb control has been modified to provide easier fine tuning at lower settings. Perhaps most notably, even with all these features and more, the Tone Master Twin Reverb is in fact about only half the weight of an all-tube Twin.
The blonde vinyl covering elegantly evokes classic early-'60s Fender vibe, and front panel features give guitarists a playing experience identical to the tube version, including Fender's world-standard reverb and tremolo effects. Additional rear-panel features deliver modern convenience and flexibility - including an output power selector for full power and five attenuated settings, balanced XLR line output with impulse response (IR) cabinet simulations captured with Shure SM57 and Sennheiser MD421 microphones, mute switch for silent stage or recording use, USB port for firmware upgrades, and more.
FEATURES
- Two Celestion® Neo Creamback speakers
- Normal and Vibrato channels, each with two inputs and Bright switches
- Rear-panel output power selector for full power and five attenuated settings
- Balanced XLR line output with two impulse response (IR) cabinet simulations, level control, and ground switch
- Lightweight, resonant pine cabinet
- Power jewel illuminates in different colours for normal operation, warmup, and mute/silent mode
- USB port for firmware upgrades
- Universal worldwide 100V 240V operation
- Cover and two-button footswitch included
LEGENDARY TWIN TONE
This amp features the most accurate emulation of our original Twin Reverb. Sound like the original, without the extra weight and maintenance.
ONBOARD TREMOLO AND REVERB
Our powerful convolution-based technologies recreate the classic reverb and tremolo effects that made our amps famous and inspired new genres of music.
REAR PANEL FEATURES
This amps rear panel is packed with useful controls and connections: Line Output with Level control, ground lift switch to eliminate hum and a three-way IR cabinet simulation switch to select various microphone options.
6-WAY POWER ATTENUATOR SWITCH
Enjoy full, natural tone at almost any volumefrom a full 85W of Fender power down to bedroom- and apartment-friendly 1W.
CELESTION® NEO CREAMBACK SPEAKERS
Designed to match the traditional G12M-65 Creamback speaker, the Celestion® Neo Creamback speaker is engineered using lightweight neodymium magnets.
SOLID PINE CABINET
Lighter than plywood, solid pine is a traditional Fender cabinet material from the 50s and 60s, making for more resonant and more musical speaker cabinets.
ELECTRONICS
Voltage
230V EUR
Wattage
200W into 4 (Simulates 85W Tube Amp Performance)
Channels
Two - (Normal and Vibrato)
Inputs
Four - (1/4", Two Normal and Two Vibrato)
Effects
Reverb, Tremolo
Line Out
One - (Balanced XLR with Ground Lift and Level Control)
HARDWARE
Cabinet Material
Lightweight Solid Pine
Amplifier Covering
Blonde Textured Vinyl
Grille Cloth
Oxblood
Amplifier Jewel
Red (Power), Red/Amber (Warmup), Amber (Mute)
Front Panel
Black
Handle
Moulded Plastic Strap with Nickel-Plated Caps
SPEAKERS
Speakers
Two - 12" Celestion® NEO Creamback
Total Impedance
4 ohms
ACCESSORIES
Recommended Cover
P/N: 0050250000, '65 Twin Reverb®, Black (Included)
Footswitch
2-Button Footswitch Included
MEASUREMENTS
Amp Height
20.24" (51.41 cm)
Amp Width
26.15" (66.4 cm)
Amp Depth
10.375" (263.52 mm)
Amp Weight
33 lbs (15 kg)